Dukane 8912 Manuale Utente

Portable LCD ProjectorModel 8755G89128913USER’S MANUAL#070017

9Setting upWARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damag

10Setting upConnecting your devicesBe sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are

11Setting upNOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable t

12Setting upConnecting power supplyAt rst, make sure that the power switch of the projector is set to OFF position (marked "O").1. Put the

13Remote controlPutting batteriesPlease set the batteries to the remote control before using it. If the remote control starts to malfunction, try to r

14Using as a simple PC mouse & keyboardThe enclosed remote control works as a simple mouse and keyboard of the PC, when the projector's USB p

15Turning on the power1. Make sure that the power cord is rmly and correctly connected to the projector and the outlet.2. Remove the lens cover, and

16Selecting an input signal1. Press INPUT button on the projector. Each time you press the button, the projector switches its input port as below.

17OperatingSearching an input signal1. Press SEARCH button on the remote control.The projector will start to check its input ports in order to nd any

18Adjusting the zoom and focus1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture.OperatingFocus ringZoom ring

1Projector8755G/8912/8913User's Manual (detailed) Operating GuideThank you for purchasing this projector.WARNING Before using this product, pleas

19Adjusting the position1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen

20OperatingUsing the magnify feature1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen and

21OperatingTemporarily blanking the screen1. Press BLANK button on the remote control. The blank screen will be displayed instead of the screen of in

221. Press the MENU button on the remote control or the projector. The Advanced Menu or EASY MENU, which has priority just after powered on will appe

23Using the menu function (continued)In the Advanced Menu2. Use the ▲/▼ cursor buttons to select a menu. If you want to change it to the EASY MENU, se

24EASY MENUEASY MENUItem DescriptionASPECTUsing the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu (29).AUTO KEYST

25EASY MENUItem DescriptionBRIGHTNESSUsing the ◄/► buttons adjusts the brightness.See BRIGHTNESS item in PICTURE menu (26).CONTRASTUsing the ◄/► butt

26PICTURE MenuPICTURE MenuItem DescriptionBRIGHTNESSUsing the ▲/▼ buttons adjusts the brightness.Light ó DarkCONTRASTUsing the ▲/▼ buttons adjusts the

27Item DescriptionSHARPNESSUsing the ▲/▼ buttons adjusts the sharpness.Strong ó Weak• There may be some noise and/or the screen may icker for a momen

28PICTURE MenuTo adjust CUSTOM function in GAMMA and COLOR TEMPSelectin g a mode whos e name inclu des CUSTOM in GAMMA or COLOR TEMP item

2About this manual. . . . . . . . . . 1Content . . . . . . . . . . . . . . . . . . 2Projector features. . . . . . . . . . 3Preparations . . . . . . .

29IMAGE MenuIMAGE MenuItem DescriptionASPECTUsing the ▲/▼ buttons switches the mode for aspect ratio. For a computer signalNORMAL ó 4:3 ó 16:9 ó SMALL

30IMAGE MenuItem DescriptionH PHASEUsing the ▲/▼ buttons adjusts the horizontal phase to eliminate icker.Right ó Left• This item can be selected only

31INPUT MenuINPUT MenuItem DescriptionPROGRESSIVEUsing the ▲/▼ buttons switches the progress mode.TV ó FILM ó TURN OFF• This function is performed onl

32Item DescriptionVIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.(1) Use the ◄/► buttons to select the input port.(2) Using

33INPUT MenuItem DescriptionRESOLUTIONThe resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector.(1) In INPUT menu select

34SETUP MenuSETUP MenuItem DescriptionAUTO KEYSTONE EXECUTESelecting this item performs the automatic keystone distortion correction. Projector automa

35SETUP MenuSETUP Menu (continued)Item DescriptionWHISPERUsing the ▲/▼ buttons turns off/on the whisper mode.NORMAL ó WHISPER• When WHISPER is selecte

36SCREEN MenuSCREEN MenuItem DescriptionLANGUAGEUsing the ▲/▼ buttons switches the OSD (On Screen Display) language.TÜRKÇEPOLSKISUOMIENGLISH  FRA

37SCREEN MenuItem DescriptionSTART UPUsing the ▲/▼ buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no

38SCREEN MenuItem DescriptionMyScreenThis item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST

3Fastening the lens coverTo avoid losing the lens cover, please fasten the lens cover to the projector using the enclosed strap.1.Fix the strap to the

39SCREEN MenuItem DescriptionMESSAGEUsing the ▲/▼ buttons turns on/off the message function.TURN ON ó TURN OFFWhen the TURN ON is selected, the follow

40OPTION MenuOPTION MenuItem DescriptionAUTO SEARCHUsing the ▲/▼ buttons turns on/off the automatic signal search function.TURN ON ó TURN OFFWhen the

41Item DescriptionAUTO OFFUsing the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.Long (max. 99 minutes) ó Short

42Item DescriptionMY BUTTONThis item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (6).Choose 1 or 2 on the

43Item DescriptionSERVICE(continued)AUTO ADJUSTUsing the ▲/▼ buttons enables/disables the automatic adjustment. When DISABLE is selected, the automati

44Item DescriptionSERVICE(continued)KEY LOCKUsing the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons

45Item DescriptionSECURITYThis projector is equipped with security functions.User registration is required before using the security functions.Please

46Item DescriptionSECURITY(continued)1.3 If you have forgotten your PASSWORD1.3-1 Follow the procedure in 1.1-1 to display the ENTER PASSWORD box.1.3

47Item DescriptionSECURITY(continued)2.2-4 Move the cursor to the right side of the PASSWORD AGAIN box and press the ► button to display the PASSWORD

48Item DescriptionSECURITY(continued)3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed. 3.1-3

4Part namesPart namesProjector(1) Lamp cover (51) The lamp unit is inside.(2) Focus ring (18)(3) Zoom ring (18)(4) Control panel (5)(5) Elevator

49Item DescriptionSECURITY(continued)4. Using the Transition Detector FunctionWhile the Transition Detector function is ON, when power switch is start

50Item DescriptionSECURITY(continued)4.2-4 Move the cursor to the right side of the PASSWORD AGAIN box and press the ► button to disp

51MaintenanceLampA lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note t

52MaintenanceLamp (continued)Lamp warning HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE• If the lamp should break (it will make a loud bang wh

53Please check and clean the air lter periodically. When the indicators or a message prompts you to clean the air lter, comply with it as soon as po

54MaintenanceInside of the projectorIn order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once

55TroubleshootingIf an abnormal operation should occur, stop using the projector immediately. TroubleshootingOtherwise if a problem occurs with the pr

56TroubleshootingRegarding the indicator lampsWhen operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it accordi

57TroubleshootingRegarding the indicator lamps (continued)POWER indicatorLAMP indicatorTEMP indicatorDescriptionBlinkingIn RedorLightingIn RedTurnedof

58TroubleshootingPhenomena that may be easy to be mistaken for machine defectsAbout the phenomenon confused with a machine defect, check and cope with

5Part namesControl panel(1) STANDBY/ON button (15)(2) INPUT button (16, 22)(3) MENU button (22) It consists of four cursor buttons.(4) POWER indic

59Phenomena that may be easy to be mistaken for machine defects (continued)Phenomenon Cases not involving a machine defectReferencepageNo pictures are

60SpecificationsSpecificationsSpecificationItem SpecificationProduct name Liquid crystal projectorLiquid Crystal PanelPanel size 1.6 cm (0.63 type)Drive s

61SpecicationsSpecications (continued)[unit: mm]

1Projector8755G/8912/8913User's Manual (detailed)TechnicalResolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode720 x 400 37.

2Initial set signalsInitial set signalsThe following signals are used for the initial settings. The signal timing of some PC models may be different.

3Connection to the portsACOMPUTER IN1, BCOMPUTER IN2, CMONITOR OUT D-sub 15pin mini shrink jack• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω ter

4Connection to the ports (continued)4321HVIDEORCA jack• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43• 1.0±0.1Vp-p, 75Ω terminatorGS-VIDEOMini DIN

5Connection to the ports (continued)IAUDIO IN1, JAUDIO IN2Ø3.5 stereo mini jack• 200 mVrms 47kΩ terminatorAUDIO IN3 KL, LRRCA jack x2• 200 mVrms 47kΩ

6Connection to the ports (continued)NUSBUSB B type jackPin Signal1 +5V2 - Data3 + Data4 Ground2134ONOCONTROLD-sub 9pin plug• About the details of RS-2

7Command Control via the NetworkCommand Control via the NetworkConnecting the cable1. Turn off the projector and the computer. 2. Connect the CONTROL

6Part namesRemote control(1) VIDEO button (17)(2) COMPUTER button (16)(3) SEARCH button (17)(4) STANDBY/ON button (15)(5) ASPECT button (17)(6) A

8Command Control via the Network (continued)Requesting projector status (Get command)(1) Send the following request code from the PC to the projector.

9Names  Operation Type HeaderCommand DataCRC Action Type Setting CodePower Set Turn off BE  EF 03 06  00 2A  D3 01  00 00  60 00  00Turn onBE  EF 0306

10Command Control via the Network (continued)Names  Operation Type HeaderCommand DataCRC Action Type Setting CodeUser Gamma Pattern Set Off BE  EF 03

11Command Control via the Network (continued)Names  Operation Type HeaderCommand DataCRC Action Type Setting CodeCOLOR TEMP GAIN B Get BE  EF 03 06  0

12Command Control via the Network (continued)Names  Operation Type HeaderCommand DataCRC Action Type Setting CodeOVER SCAN Get BE  EF 03 06  00 91  70

13Command Control via the Network (continued)Names Operation Type HeaderCommand DataCRC Action Type Setting CodeCOMPUTER IN1 Set SYNC ON G ON BE  EF 0

14Command Control via the Network (continued)RS-232C communication command table (continued)Names  Operation Type HeaderCommand DataCRC Action Type Se

15Command Control via the Network (continued)Names  Operation Type HeaderCommand DataCRC Action Type Setting CodeLANGUAGE Set ENGLISH BE  EF 03 06  00

Command Control via the Network (continued)RS-232C communication command table (continued)Names  Operation Type HeaderCommand DataCRC Action Type Sett

1About The Symbols Various symbols are used in this manual, the user’s manual and on the product itself to ensure correct usage, to prevent danger to

7Setting upSetting upInstall the projector according to the environment and manner the projector will be used in.On a horizontal surfaceSuspended from

2 Safety Precautions WARNINGNever use the projector if a problem should occur.Abnormal operations such as smoke, strange odor, no image, no sound, e

3 WARNINGBe cautious of High temperatures of the projector.High temperatures are generated when the lamp is lit. It could result in fire or burn. Use

4 WARNINGBe careful in handling the light source lamp.The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break wi

5 Safety Precautions (continued) CAUTIONBe careful in moving the projector.Neglect could result in an injury or damage.• Do not move the projector

6 Safety Precautions (continued)NOTEDo not give the remote control any physical impact.A physical impact could cause damage or malfunction of the remo

7 Safety Precautions (continued)NOTEAbout consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have

8• If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement l

9 Regulatory NoticesFCC Statement WarningWARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,

2900 Dukane DriveSt. Charles, Illinois 60174 www.dukcorp.com/avToll-free: 800-676-2487Fax: 630-584-5156e-mail: [email protected] Visual Produc

8Setting upOn a horizontal surfaceSuspended from the ceiling• Keep a space of 30 cm or more between the sides of the projector and other objects such